Loading... Please wait...

Wicked Witch 20700 Mech MOD Kit by Deathwish Modz

$199.99
SKU: 500400
Availability:
Ships within 24 to 48 hours (see our shipping policy for details). NO INTERNATIONAL ORDERS.
Qty

    Wicked Witch 20700 Mech MOD & Unholy V2 RDA Bundle by Deathwish Modz

    The Wicked Witch Mech MOD from Deathwish Mods is a beautifully engraved work of art that performs as well as it looks, stunning the opposition with the flash and clouds of a vicious storm. The solid metal chassis conducts electricity like magic, pushing unadulterated voltage straight to your coils. The silver-plated everything of the Deathwish firing switch performs impeccably for even the most straining of coil builds, and the signature copper firing switch plate can be swapped for the exclusive V2 Switch Plate.

    The Unholy v2 RDA is similarly innovative, utilizing a uniquely constructed build deck that uses a ball-bearing in each post to clamp down on inserted leads, much like the anvil posts of the SZX RDA. The two crossbones "X"-shaped slots—positioned on either side of the sleeve—provides liberal amounts of air to demanding builds.

    *PLEASE NOTE THIS PRODUCT WILL ONLY SHIP TO A VERIFIED DOMESTIC BILLING ADDRESS (Your U.S. Credit Card Billing Address) & WILL REQUIRE A SIGNATURE AT DELIVERY. INTERNATIONAL CUSTOMERS MUST PAY BY BANK WIRE TRANSFER. INTERNATIONAL INQUIRES CAN BE MADE >HERE<

    *This product does not qualify for free shipping and it has a fixed insured shipping cost of $24.99 and import tariff fees for U.S. addresses ONLY.

    Find Your Spares and Supplies Here:

    Features

    Wicked Witch 20700 Mech MOD

    • Copper, Brass, or Stainless Steel Chassis
      • "Wicked Witch" Engraved Design
      • Single Set of Chassis Threads
      • Limited Edition, Only 500 Units Produced (Single & Final Batch):
        • 150 Gunmetal
        • 150 Stainless Steel
        • 100 Brass
        • 100 Copper
    • Accepts Single 20700 or 18650 Batteries
      • 18650 Delrin Adapter Included
    • Hybrid 510 Connection
    • Spring-Loaded Firing Switch
      • Signature Crossbones v2 Copper Switch
      • Silver-Plated Spring
      • Silver-Plated Copper Battery Contact
      • PEEK Insulation
    • Diameter: 26mm

    Unholy v2 RDA

    • Stainless Steel Construction
      • Matching Finish
    • Two-Post Build Deck
      • Ball-Bearing Clamping Mechanism
        • One 4mm Encased Ball-Bearing per Post
          • Insert Lead Above or Below Bearing
      • Allen Grub Screws
        • Top-Tension
      • PEEK Insulation
    • Fully Adjustable AFC
      • Dual "X"-Shaped Slots
    • Wide Bore ULTEM 810 Drip Tip
    • Copper Positive Pin
    • Diameter: 26mm

    Box Contents

    • 1x Wicked Witch 20700 Mech MOD
    • 1x Delrin 18650 Adapter
    • 1x DWM Contact Removal Tool
    • 1x Unholy v2 RDA
    • 1x Spare Parts Pack
    • 1x User Manual

    PLEASE NOTE: This is a direct battery contact mechanical device and it is strictly for ADVANCED USERS ONLY! Be sure to check your atomizer's 510 connection when using it with this device. If your atomizer's positive pin in the center of the 510 connection does not protrude >1mm from the threads of the connection, your device WILL fail catastrophically. Use at your own risk! This mod does not have a locking mechanism, so keep it away from children! Mechanical mods are an advanced user product and should not be used by anyone without the proper knowledge on your battery's amp limit and how to test your atomizer's resistance. This mechanical mod uses very strong magnets in the switch—please be careful when disassembling your mod. Avoid using your device to the point where the batteries are completely discharged. Always double-check the resistance of your atomizer on an external ohmmeter, and ensure that your batteries are inserted with the positive pole facing the atomizer in order to prevent battery failure.

    IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    Sign up for our newsletter

    View Cart Go To Checkout