Loading... Please wait...

Kanger T3S / MT3S Atomizer Heads (5pcs)

 star rating 5 Write a Review
$9.95 (You save $4.00)
SKU: 300003
Ships within 24 to 48 hours (see our shipping policy for details).

    Kanger T3S / MT3S Atomizer Heads (5pcs)

    Save money and resources with our replacement Kanger T3S / MT3S Heads and switch out the old head to get vaping again, as opposed to the old disposable clearomizers that you had to toss in the trash when they are no longer good. These T3S Heads contain both the wick and the heating coil, which allows the e-liquid to be vaporized and inhaled. All you have to do is unscrew the old head from the base then replace it with one of our spares and you’re good to go. 

    Replacement Heads

    The price you see is for a set of 5 replacement heads. Always keep a couple of heads handy in case a coil goes out and you need a replacement in a hurry. Our Kanger T3S / MT3S Heads are available in 1.5 ohm, 1.8 ohm, 2.2 ohm, and 2.5 ohm.


    Our recommended voltage outputs for different heads are as follows: 3.0V – 3.8V for 1.8 ohm, 3.0V – 4.2V for 2.2 ohm, and 3.3V – 4.5V for 2.5 ohm.


    • Coil Type: Single Bottom Coil
    • Resistance Rating: 1.8 ohm, 2.2 ohm or 2.5 ohm
    • Wick: Short Wick

    IMPORTANT NOTE: These heads are not compatible with older model T3 eGo Bottom Coil Head Replacements and without a T3S eGo Bottom Base. However you can use older T3 tubes with a T3S eGo Bottom Base and a T3S eGo Bottom Coil Head Replacement.

    Write your own product review

    1. very good  star rating

      Posted by Joe.D on 23rd Aug 2014

      Works well with a higher pg. than vg..Same with my T4S 808D Clero's. The thicker the liquid the quicker you will get that burnet taste and vey little vapor... All and all great product's by EVC...

    2. Not bad  star rating

      Posted by Joe on 18th Jul 2014

      Work well with a higher pg liquid, higher vg will clog these and make the draw feel weak. They also leak quite often in my experience but aside from that they work well and give good vapor

    3. Outstanding  star rating

      Posted by scott on 24th Jun 2014

      These replacement heads last a lot longer than the previous ones. I constantly hit my vape constantly on a daily basis. They look the same as the old ones but they work and last much longer. I'm very happy with this product.

    4. Love the T3S  star rating

      Posted by Unknown on 19th May 2014

      These work great! Just like the originals.

    5. clouds for days  star rating

      Posted by Unknown on 1st Apr 2014

      These make huge clouds and require a higher voltage to properly fire them. I would use a vv or wv but thats just me

    6. The Draw  star rating

      Posted by AIR on 1st Feb 2014

      The draw in this feels looser that the draw on that Kanger protank IMO. This is my go to tank system. The price is good here on EVC and the customer service is outstanding.

    7. Fits perfectly  star rating

      Posted by angiehope on 14th Nov 2013

      Works just fine with the T3Ss.

    8. Love the T3S  star rating

      Posted by Glenn M on 30th Oct 2013

      I'm really liking these BCC clearos. They work very well, they last, and they're inexpensive. Highly recommended.

    9. Perfect.  star rating

      Posted by AIR on 28th Sep 2013

      You CAN clean them and dry burn between flavors, or toss it out and start with a fresh atty head with these replacements. It's all subjective. These are priced well on EVC that you can't go wrong.

    10. It works.  star rating

      Posted by John on 19th Sep 2013

      These wick/coil replacements are so inexpensive, it doesn't make sense to go through the trouble to re-coil/wick your Kanger clearomizers yourself. Works like brand new, simple screw on replacement.

    Consumable Item. This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    View Cart Go To Checkout

    Please Sign Up For Our Newsletter

    * indicates required