Zephyrus Sub-Ohm Hybrid Atomizer by UD
The newest sub-ohm hybrid Atomizer on the block, the Zephyrus by Youde (UD) is a long-awaited device bringing the best of all worlds in a portable, user-friendly, and downright sexy package. This device allows users the choice between inserting a prebuilt head available in .3Ω, .4Ω, and .5Ω, or building their own coil on the included RBA head. The prebuilt coil heads feature dual coils for maximum cloudage, a ceramic base for pure taste, and authenic Koh Gen Do cotton wicks for a healthy, tasty vape. The RBA coil head is a four (4) post design with bottom air intake, making the Zephyrus a highly functional RTA device in its own right. The Zephyrus, named after the Greek god of the West wind, is appropriately named, given the massive adjustable dual cyclops airholes it has installed, benevolently bringing generous airflow to your coils. Your coils, of course, give their tithe to the Greek god in the form of big, beautiful clouds that come with ease. This clearomizer is definitely a god-tier device.
Replacement Heads Available Here:
UD Zephyrus Features
IMPORTANT NOTE: Rebuildable Atomizers ( RBAs, RTAs, RDAs ) are for EXPERTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.
WARNING: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact our customer service team.
OTHER IMPORTANT NOTES
Posted by Chris on 29th Nov 2015
This tank vapes like a dream and the flavor is great. It produces a large amount of vapor. The almost seamless design looks super clean. The only complaint I have is that the prebuilt coils need replacing often. Never a dry hit, just muted flavor after a week and a half. Overall, my all day tank.
Posted by AznGuy76 on 24th Nov 2015
Top fill is a very good option, easy to fill but the build deck is a pain to deal with. You need to build very close to the posts and barely fit around 8 wraps of 24g kanthal. The chimney narrows down on the top so it's hard not to have a short.
Posted by Unknown on 25th Aug 2015
Drinks fluid a little fast but a great tank if wicked correctly
Posted by Unknown on 15th Aug 2015
From the prebuilt coils they're great unless you want high wattage. The rebuildable deck although tight to work with can get up to 70+watts. Either way great flavor, great vapor. I wish they had some sort of instructions as I almost the out the top fill extra plug. And until I watched the video review had no oar how to fully fill the 5ml tank.
Posted by Daniel Stegner on 7th Aug 2015
another great tank that won't break the bank. easy to build on. or spyglass so many coil ohm choices there's one for every kind of vaper.
Posted by Jeremy Baity on 18th Jun 2015
This is my first rba/rta/subohm tank. I have been building on rda's for a while now so building the small rba is no problem even with my fat finger. The problem i am having is the insulator on the the positive pin doesnt give enough protection from shorts. When I screw on the tank to a flush position I get a dead short. I have to back it off leaving a small gap to avoid the issue.
My next issue is with the stock .3 coil head that comes with the tank. IMO, this thing taste like a small amount of machine oil has come in contact with the cotton. I cannot shake that taste. These stock coils are garbage and over priced. I had to soak rba head overnight along with the other parts to get this taste out.
Once the rba is built and tank I should be able to enjoy vaping without worries right? Nope! I have to constantly keep an eye on how far its screwed in . I find my self still dripping more than using the Zephyrus. It does vape like a champ. I cannot deny
One last issue is that the "5mL" tank is not 5mL... it is like 4.2mL.
In closing I wish they would have sent 2 rba heads and kept the stock coils. I wish they would have included an extra o-ring for bottom of the coil/rba (clear) and more than one post hole screw. The things are freaking tiny. The do enclose many o-rings and a top fill plug and the heat sink drip tip adapter is cool. I kinda wish I would have got a goblin...
Posted by Michele Santoro on 16th Jun 2015
IMO this is a beautiful little tank, relatively easy to build coils once you get the hang of the small space. Incredible how much juice fits in it considering how compact it is. Love the 3 o-ring set to differentiate between them if you have multiple like me. I build nickel coils inside and use with vaporshark temp control and it's awesome
Posted by Bryan Piontek on 16th Jun 2015
When i first unboxed The zephyrus subohm tank, and put in the stock .3 coil. It vented my battery. (Was reading 0.1 )
So ive strictly been using the zephyrus in RDA mode only. This tank tends to leak if not properly wicked..(this is a very small build deck.)
However, the draw is noticeably different between the factory coil and my own builds.(even though i had a DOA coil) the stock UD head has a bit of a tighter draw in comparison to the RDA deck of this device. The 4 - 3mm holes provide deep lung inhales and super fast ramp up times. (Im using perfect blend 24g dual coil 8wraps. Reading .2 - .3) and this thing can chuck some vapor. Close to competition Rda in my opinion!
Although i had a bad coil when i first received the zephyrus, i love this tank. She really goes through juice quick! (CLOUDS!!) Oh did i mention a 5 ml capacity tank! Im loving this thing.
The flavor is top notch on the RDA. But i cant report on the factory dud :/
Posted by David S. on 1st Jun 2015
This is a well-made product and at a fraction of the cost of many comparable products. I like being able to top fill this device similarly to Kayfun 4.
Posted by nizzle_b on 30th May 2015
For a subtank, youde knocked it out of the park. Full flavor, very airey, and good cloud production. The rda section is quite small, but if you have built on the orchid or goblin, it shouldn't be to different. Good juice capacity, and never leaks. With the included extra glass section and o-rings, you should never have down time waiting for replacement parts. Included is colored o-rings (red and blue) to change up the color scheme to your liking. I really enjoyed this tank as I have been on it for a few weeks now.
This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).