Loading... Please wait...

Vortice RDA by Vapor Shark

$79.99 (You save $24.99)
Ships within 24 to 48 hours (see our shipping policy for details)

    Vortice RDA by Vapor Shark

    The Vortice was designed from the ground up to be a versatile flavor atty. The two post design make it easy for both single and dual coil builds. The key feature on the Vortice is the air flow. This revolutionary design creates a vortex of air that maximizes depth of flavor which usually goes missing on your average RDA. Airflow on this atty is tight to avoid dilution of vapor. Take notice of the sharp edges at the ends of the air blades, we have found that this configuration helps with the circulation of air but be careful because they are sharp. You will also find every accessory you would need for any atty included in the box. Single and Dual airflow sleeves, chuff cap, 510 drip tip cap, PEEK insulators and a Squonk positive pin. You heard correct, this is a squonk ready atty. Whether you are using the single or dual coil sleeve you will also notice that you can never really close off the air flow. What you end up doing is minimizing the swirling effect from the blades. No matter how you dial it in, you will always get a rich, flavorful inhale.

    For best results, we recommend to wash the entire Atomizer before use. Price is for one (1) RDA. 

    Vortice RDA Features

    • Authentic Design #NOTACLONE
    • Stainless Steel Construction
    • Two (2) post design
    • Miniature chamber provides superior flavor
    • Tight Vortex airflow design
    • Sharp air blades improves circulation
    • Single or Dual air hole sleeves
    • Peek insulators
    • Chuff cap & 510 drip tip cap included
    • Squonkable
    • (H) 38mm x  (D) 22mm

    Box Contents

    • 1x Vortice RDA by Vapor Shark
    • 1x Single Hole Air Sleeve
    • 1x Dual Hole Air Sleeve
    • 1x Chuff Cap
    • 1x 510 Drip Tip Cap
    • 1x Spare parts box

    IMPORTANT NOTE: Rebuildable Dripping Atomizers ( RDAs ) are for EXPERTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.


    1. Coils must be tested carefully with a multimeter before use.
    2. If Coil is not properly tested it will be a risk to the user to do so.
    3. Faulty Coils CAN kill electronic devices.
    4. New Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
    5. No new Coil assembly should be used on an electronic device until it is known to be safe.
    6. These items destroy electronic devices if not properly built.  This is a known issue.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    Sign up for our newsletter

    View Cart Go To Checkout