Loading... Please wait...

SubZeroX (SZX) Mini Competition RDA by Sub Ohm Innovations

$39.00
$54.99 (You save $15.99)
SKU: 110135
Availability:
Ships within 24 to 48 hours (see our shipping policy for details).
Qty

    SubZeroX (SXZ) Mini Competition RDA by Sub Ohm Innovations

    Introducing the Sub Ohm Innovation's SubZeroX Mini RDA! This performance-centric dripper utilizes the innovative clamping pin post system first used in the original SXZ RDA.

    These pin-loaded posts easily accept difficult coils and thick leads, utilizing long-lasting flat set Allen grub screws that tighten down horizontal cylinders in each post—installed leads of every size have complete and even pressure applied for exceptionally reliable conductivity.

    Sub Ohm Innovation's updated RDA also does away with the bottom-feed airflow of old, instead favoring two rows of four side-feed airholes on either side of the external sleeve—chosen for their ability to coax accelerated vapor production from almost any type of build installed.

    The SZX RDA's wide bore delrin drip tip allocates plenty of clearance for vapor to exit unhindered and is interchangeable with any other 810-sized (½”) drip tips. The SubZeroX dripper can also be directly connected to the SubZeroX Competition Mod for even greater competition performance.

    Find Your Spares and Upgrades Here:

    Features

    • Stainless Steel Construction
      • Stainless Steel in All Finishes
    • Large Build Deck
      • Massive 3.5mm x 3mm Post Holes
        • Clamping Pin System
          • Flat Set Screws Tighten Down Horizontal Cylinders
          • Cylinder Pins Apply High Pressure to Leads
      • PEEK Insulators
    • Fully Adjustable Airflow Control
      • Row of Four Holes on Each Side
        • Eight (8) Airholes Total
    • Silver-Plated Contacts
      • BF Squonk-Ready Positive Pin Included
    • Wide Bore 810 Delrin Drip Tip
    • Dimensions: 25mm x 25mm

    Box Contents

    • 1x SubZeroX (SXZ) Mini Competition RDA by Sub Ohm Innovations
    • 1x Sub Ohm Innovations Tool/Keychain
    • 2x Spare Allen Grub Screw
    • 2x Spare Phillips Screw
    • 1x BF Squonk Positive Pin
    • 2x Spare Clamping Pin
    • 3x Spare O-Ring
    • 1x Spare Post PEEK Insulator
    • 1x Authenticity Card

    IMPORTANT NOTE: Rebuildable Dripping Atomizers ( RDAs ) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    OTHER IMPORTANT NOTES

    1. Coils must be tested carefully with a multimeter before use.
    2. If Coil is not properly tested it will be a risk to the user to do so.
    3. Faulty Coils CAN kill electronic devices.
    4. New Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
    5. No new Coil assembly should be used on an electronic device until it is known to be safe.
    6. These items destroy electronic devices if not properly built.  This is a known issue.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    Sign up for our newsletter

    View Cart Go To Checkout