Pyro RDTA by Vandy Vape

After releasing hot ticket items one after another, Vandy Vape is on fire and showing no signs of cooling off! Striking while the iron is hot, Vandy Vape is bringing the heat with the fiery arrival of the Pyro RDTA! Despite its namesake, the design of this hybrid RDA/RTA is centered around utilizing cool airflow to the fullest to garner excellent performance from every type of build. The T-shaped slots on either side of the sleeve serve dual purposes: the top horizontal section sends chilling air directly to the front face of your coils while the bottom section's air is scooped upwards by a ramped cutout underneath the coil builds, resulting in flavor-boosting airflow from nearly every angle. The Pyro's postless build deck allows for easy coil installations and perfect positioning without any pesky posts to get in the way.

The 4mL ULTEM juice tank underneath comes with a removable capacity baffle board that reduces the capacity to 2mL—perfect for impromptu spy trips to TPD-compliant Europe—as well as a spare Pyrex glass tank section. The dual 4mm fill ports on either side of the deck are open with the top cap removed, but upon replacing the cap, two stoppers milled into the cap seal the two ports. Vandy Vape included three separate drip tip options with the Pyro RDTA: a 9mm bore 810 ULTEM tip and a 9.5mm bore Delrin tip, as well as a 510 drip tip adapter for any of your previous favorite drip tips.

Features

• Stainless Steel / ULTEM / Pyrex Glass Construction
• 2mL/4mL Juice Capacity
• Dual 4mm Fill Ports
• Sealed With Top Cap Installation
• Capacity Baffle Board Included
• Pyrex & ULTEM Tank Sections Included
• Postless Build Deck
• Four Terminals
• 3mm x 2.5mm Each
• Phillips Screws
• Side-Tension
• Gold-Plated
• Dual 11mm Cyclops Wicking Ports
• PEEK Insulation
• Fully Adjustable AFC
• Dual T-Shaped Slots
• Top Portion
• Side-Feed
• 8mm x 2mm Each
• Cyclops Slot
• Bottom Portion
  • Bottom-Feed
  • 4mm x 2mm Each
  • Half-Circle
• Single / Dual Coil Compatible
• Gold-Plated Positive Pin
• Three Drip Tip Options
• ULTEM 810
• Bore Width: 9mm
• Delrin Doc Tip
• Bore Width: 9.5mm
• 510 Drip Tip Adapter
• Diameter: 24.4mm

Box Contents

• 1x Pyro RDTA by Vandy Vape
• 1x ULTEM 810 Drip Tip
• 1x ULTEM Tank Section
• 1x Delrin Doc Tip
• 1x Delrin 510 Drip Tip Adapter
• 1x Spare Pyrex Glass Tank Section
• 1x Delrin Chamber Reducer
• 1x Spare Parts Pack

IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.