Loading... Please wait...

Plaque 150W Box MOD w/ Triad (+2)Genesis RDTA by Asmodus

$229.99 (You save $20.00)
SKU: 190184
Ships within 24 to 48 hours (see our shipping policy for details)

    Plaque 150W Box MOD w/ Triad +2 Genesis by Asmodus

    For unbeatably stylish and luxurious devices practically dripping with decadence and sophistication, your eyes won't even let you look any further than AsMODus' incredible one-two knockout combo of the Plaque 150W and the updated Triad Genesis RDTA. 

    The Plaque 150W is instantly recognized as a work of art. Carefully and pristinely endowed with deep and long-lasting engravings that allow the brilliant shine of the polished zinc alloy chassis to shine through from underneath the device's black satin finish. But this mod isn't all looks: powered by one of AsMODus' legendary chipsets sourced fresh off the presses of 2016, the Plaque has a fully capable temperature control module that easily supports popular heating element materials, such as nickel (Ni200), titanium (Ti), and stainless steel (SS), and can adopt custom user-inputted TCR values for even greater versatility—all this on top of the Plaque's impressive 150W ceiling. Both the OLED display and the adjustment buttons are bottom-mounted, giving the device an extremely slick and svelte aesthetic.

    The Triad (+2) Genny is designed to seamlessly match the Plaque: adorned in the same deep sparkling engravings, these two device together are a match made in vaping heaven. The Triad RDTA is very similar to the Triad RDA, in that the build deck is optimized for triple vertical coil configurations for exemplary flavor and satisfying vapor production without the constant risk of spitbacks shadowing your vape experience. The Triad RDTA, however, can hold up to 3.5mL of juice in its Pyrex glass tank—this tank is refilled by removing the hand-turned screw in the center of the build deck to reveal a fill port leading down to your tank. The Triad's triple airflow is more than capable of throttling hot coils, but in case you don't need all three coils, baffle boards designed to redirect precious airflow are included with the Triad RDTA.

    By combining the exceptional versatility of the Plaque with the impressive performance of the Triad RDTA, then finishing off the combination by etching ultra-stylish matching engraved finishes, AsMODus has created the "must-have" device for vaping collectors everywhere. With its show-stopping looks, on-the-go–friendly design, and envy-garnering aesthetics, the Plaque 150W alongside the Triad (+2) RDTA is sure to make an impression, no matter whether it's admired by passersby on the street or by house guests from behind a protective glass case.



    Plaque 150W Box MOD

    • Zinc Alloy Construction
    • Powered by GX-150-HF Chip
      • Hyper Power Saving Capabilities
      • "Flavor Taste" Boosting Mode
    • Accepts Dual 18650 Batteries
      • Magnetic Battery Bay Door
    • Deep Stylish Engravings
    • Power Mode:
      • Wattage Range: 5W - 150W
      • Voltage Range: ≤7.5V
    • Temperature Control Mode:
      • Temperature Range: 212°F - 572°F
      • Supports:
        • Nickel (Ni200)
        • Titanium (Ti)
        • Stainless Steel (SS)
        • TCR/TFR
    • Resistance Range: 0.1 ohm - 2.5 ohm
    • Bottom-Mounted Display & Adjustment Buttons
    • Dimensions: 93.5mm x 57mm x 25.5mm

    Triad +2 Genesis RDTA 

    • 304 Grade Stainless Steel / Pyrex Glass Construction
      • Deep "Plaque"-Style Engravings
    • 2.5mL Juice Capacity
      • Three Wicking Ports
        • 3mm Each
      • Centered Fill Port
        • Sealed Via Hand-Turned Screw
    • Three Point Post Design
      • Six Terminals
        • Top - Positive
        • Bottom - Negative
        • 3mm x 2mm Each
      • Milled Negative Posts
      • Allen Grub Screws
        • Side-Tension
    • Fully Adjustable AFC
      • Triple Coil Inlets
        • Three Groupings of Four Triangular Slots
    • Tapered Wide Bore Delrin Drip Tip
      • ID: 13mm
    • Adjustable Positive Pin
      • Gold-Plated
    • Ceramic Baffle Boards
    • PEEK Insulation
    • Diameter: 24mm 

    Box Contents

    • 1x Plaque 150W Box MOD by Asmodus
    • 1x Triad +2 Genesis RDTA by asMODus
      • 1x Tapered Wide Bore Drip Tip
    • 1x Spare Pyrex Glass Tank
    • 2x Ceramic Baffle Board
    • 1x Allen Key
    • 1 x Micro-USB Cable
    • Misc Spare Parts
      • Screws
      • O-Rings

    IMPORTANT NOTE:  Understanding how to handle and care for Lithium type batteries is very important and should always be practiced.  Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled.  DO NOT charge your batteries overnight or while unattended for a prolonged period of time!  Always charge your batteries in a fire-proof surface/area and DO NOT expose them to high temperatures (e.g. inside your car).  DO NOT expose the battery's terminals to metal objects or immerse in water/liquid.  We are not responsible for any damage if there is any misuse, abuse or modification of the batteries and/or chargers in any shape or form (including pack making).  Furthermore, Electric Vapor Cigarettes LLC (a.k.a. EVcigarettes.com) will not be held responsible or liable for any injury, property damage, or defect that is caused by misuse, abuse or modification of Lithium batteries and/or chargers.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    30-Day Limited Warranty. See warranty section for details.

    Sign up for our newsletter

    View Cart Go To Checkout