Loading... Please wait...

Origen RDA Clone by Yeahsmo - Black

 star rating 4 Write a Review
$29.99 (You save $25.99)
SKU: 900387
Ships same day if order placed before 2:00 P.M. EST (except Sundays and Holidays)

    The Yeahsmo Origen (clone) Black Edition is a 22mm Rebuildable Dripping Atomizer ( RDA ) that features a PVD black coated stainless steel exterior, adjustable airflow controller ring, a deck with two large juice wells and a triple post design.

    Rebuildable Atomizers are for the vaping enthusiast and will allow you to build your own coil and wicking system.

    The deck of the Origen has two (2) deep juice/wick wells that will help reduce the frequency of having to drip as often.

    It has two negative allen screws (posts) and a brass postive post with a knurled nut that will allow for single or dual coil builds.

    The top cap features an adjustable airflow controller ring that will allow you to configure between three different hole sizes.

    The Origen can be used with 'most' 510 drip tips and it also includes a matching drip tip!

    For best results, we recommend to wash the entire Atomizer before use.

    IMPORTANT NOTE: The Origen Rebuildable Dripping Atomizer ( RDAs ) are for EXPERTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.


    Origen Rebuildable Dripping Atomizer Clone Features

    • Rebuildable Dripping Atomizer
    • Stainless Steel Body
    • PVD Coated Black Exterior
    • Adjustable Airflow Controller Ring
    • Two (2) deep juice wells
    • Triple Post Design
    • Brass Positive Post with Stainless Knarled Nut
    • Can be built with Single, Dual Coils or Quad Coils
    • Can be built with Silica, Ekowool & Organic Cotton
    • Matching 510 Drip Tip included and can be used with 'most' 510 size Drip Tips
    • 22mm Diameter



    1. Wicks / Coils must be tested carefully with a multimeter before use.
    2. If Wick / Coil is not properly tested it will be a risk to the user to do so.
    3. Faulty Wicks / Coils WILL kill electronic devices.
    4. New Wick / Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
    5. No new Wick / Coil assembly should be used on an electronic device until it is known to be safe.
    6. These items destroy electronic devices if not properly built.  This is a known issue.


    The Origen Clone comes with

    • 1x Yeahsmo Origen Rebuildable Dripping Atomizer Clone - Black Edition
    • 1x Matching Stainless Steel Drip Tip

    Write your own product review

    1. Poor Quality  star rating

      Posted by Jeffrey Seeley on 23rd Jun 2014

      My atomizer was included free with my Evic Supreme and I included the cost of this atomizer in my decision to buy from EV. This atomizer came out of the box with the lower air control cover o-ring missing and when I tried to put an o-ring there, it was not cut deep enough for the o-ring to fit. I handle my equipment very carefully and after using this atomizer over a period of 4 hours, the paint has already flaked off in many places. The paint flakes off when (carefully) wiping this off with a washcloth.

    2. Awesome  star rating

      Posted by Steven M on 19th May 2014

      The airholes are bigger than it appeared to be in the picture. Glad I didn't have to do any drilling. Very happy with the black finish and performance I'm getting out of it.

    3. Perfect!  star rating

      Posted by Jordan Sharpe on 8th May 2014

      This came in 2 days ago with my nzonic. After 2 days of solid use, I can say this thing is perfect! My juices taste great and I don't have to redrip as often. I thought about getting the 3D instead of this. I might just get another one of these.


    Sign up for our newsletter

    View Cart Go To Checkout