Loading... Please wait...

Kanger DripBox 160W Starter Kit

$79.99 (You save $15.00)
Ships within 24 to 48 hours (see our shipping policy for details)

    Kanger DripBox 160W Starter Kit

    The DripBox 160W, Kanger's 2nd iteration of the DripBox Kit, builds upon the success of its predecessor and takes it to an entirely different level with 100W more power than its predecessor. An easy to read OLED display screen was also added to bring all of the DripBox's settings to plain view. Additionally, this version of the Dripbox implements full temperature control support for nickel, titanium, and stainless steel, opening up worlds of options in terms of coil building and vaping styles. The same 7mL juice capacity 'squonk' styled bottle as the original Dripbox 60W is present and sends e-juice straight to the RDA's deck by giving the plastic bottle a squeeze. The DripBox 160W is powered by two 18650 batteries held behind the bottom-mounted hinge-lock battery bay and has a side-mounted micro-USB for easy on-the-go recharging.

    The RDA included in the DripBox 160W kit, the SubDrip 160, is very uniquely designed: the deck can be removed and easily replaced with Kanger's replacement decks. Each replacement deck houses a dual coil build with either micro coils or clapton coils that function perfectly as is, but can also be removed and replaced with a self-made coil build, making these replacement decks an irreplaceable resource that allow vapers to hot-swap old builds with a brand-new build at a moment's notice -- no fiddling with wires required! The SubDrip also has dual sources of airflow built into the sleeve, two 2mm pinholes ideal for MTL vaping and two 13mm x 1.5mm cyclops slots for DTL vaping, that can be alternated via the delrin wide bore top cap.

    By revisiting a popular setup and upgrading it in order to make it perfect for today's advanced vapers, Kanger has created a monster of a device that will be very difficult to surpass.

    DRIPMOD 160W Features

    • Constructed using Stainless Steel / Aluminum Alloy
    • Power Mode:
      • Wattage Output: 7W-160W
      • Minimum Resistance: 0.1Ω
    • Temperature Mode:
      • Temperature Range: 200°F - 600°F
      • Minimum Resistance: 0.05Ω
      • Supports:
        • Ni200
        • Ti
        • SS
    • 7ml Capacity
      • 'Squonk' Action - Squeeze to Feed Juice into RDA Deck
    • Bottom-Mounted Battery Bay
      • Hinge-Lock
      • Accepts Dual 18650
    • Gold-Plated Spring-Loaded Positive Pin 
    • Micro-USB Charge Port
    • OLED Display Screen
    • Safety Protection Suite:
      • Low Battery
      • Short Circuit
      • Reverse Polarity
      • Overtime Protection

    SUBDRIP 160 Features

    • Constructed using Stainless Steel
    • Swappable Build Decks
      • Prebuilt/Preinstalled Dual Coils
      • Rebuildable
      • Updated "Velocity-Style" Posts
        • 1.5mm Post Holes
      • Gold-Plated Contact Plate
    • Fully Adjustable Airflow
      • Direct-To-Lung
        • Dual Cyclops
        • 13mm x 1.5mm
      • Mouth-To-Lung
        • Dual Pinholes
        • 2mm
      • Adjusted Via Top Cap
    • Delrin Wide Bore Drip Tip
      • 12mm
    • 22mm Diameter

    Box Contents

    • 1x DripMod 160W TC Box Mod
    • 1x SubDrip 160 RDA
    • 1x Spare Squonk Bottle
    • 1x Spare SubDrip Deck
    • 1x Micro-USB Cable
    • 1x User Manual

    Replacement Decks Available Here:

    Kanger Dripbox Deck Replacement

    WARNING: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    DOA Warranty on the Clearomizer & Clearomizer Head. 30-Day Limited Warranty on the battery and charger. See warranty section for details.

    Sign up for our newsletter

    View Cart Go To Checkout