Sorry but this item is temporarily out of stock.
Please check back at a later time.
Joyetech eGrip RBA Base
Enhance the vaping experience and the performance of your Joyetech eGrip 20W Box MOD. With the Joyetech eGrip RBA Base you can build your own coils for the eGrip. Building your own coil will allow you to customize your vape experience and it is more economical. In addition, the Joyetech eGrip RBA Base adopts larger air in-flow with an extra inlet hole in RBA stand. The Joyetech eGrip RBA Base comes with a pre-installed coil & wick (1.2 ohm).
Posted by OHMwerks (jimmy gonzalez) on 5th Sep 2015
awesome deck thks ev
Posted by Cody B. on 21st May 2015
The RBA base completely changes how the eGrip vapes, allowing for a very flavorful lung inhale which produces a nice cloud of thick wet vapor and sufficient airflow. There is indeed a bit of a learning curve to this product, but if you follow some of the online tutorials, you'll be building like a pro in no time. As for the leaking issues, this is generally related to not having enough wick and/or creating pressure inside the tank (for example, by blowing into it). I've found that filling from the side can put pressure inside the tank causing a leak out the bottom (if using a dropped with a full tank). To rectify any leaking issues, 1) Don't blow into the device, and 2) Fill from the bottom. You'll also notice that if you inhale hard, you may get some liquid coming up into the drip tip. Just take it easy, as there's no need to inhale like a monster. Follow this and you'll have a wonderful thick vape that should reduce most of not all your leaking issues.
Posted by hwangjungmin on 18th Mar 2015
Posted by Dave on 3rd Feb 2015
Installing this add-on is very easy and it turns the already impressive eGrip into the best Vape for the money on the market! This bargain priced eGrip competes with the $200 mods on the market!
Posted by Unknown on 3rd Feb 2015
Great flavor but leaks out the bottom pretty badly. If you don't mind the mess, it's a great vape.
Posted by TR1 on 13th Jan 2015
The RBA base has a little bit of a learning curve, but oh, is it worth it! Vapor and flavor are GREAT, and they were pretty good with the stock heads. Build is quality, pretty well designed, and rebuild method is pretty straightforward...just takes a bit of learning for things such as best way/place to tuck wicking around chimney/deck and how much wick is just right. My only real complaint is some leaking through the air hole, mostly when the tank gets too low (appx 20-25% remaining or less)...really wish it were a check valve design. The leaking isnt much and I'm guessing it may in part be related to learning the ideal wicking. Also of note- dont over crank the coil screws-it tweaks the coil leg, changes the contact point, and drops the ohms below the safety level and it wont fire.
Only a few days in but with the kinks worked out this will make the egrip close to my perfect mod.
This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).