Joyetech Cuboid Mini Atomizer
Accompanying the Cuboid Mini Box Mod in the Joyetech Cuboid Mini Box MOD Kit is the Cuboid Mini Atomizer. This uniquely designed atomizer utilizes a rectangular chassis with a small Pyrex glass cutout, giving this atomizer an easily recognizable signature look. The Cuboid Mini Atomizer also makes use of the same tried-and-true leak-proof concealed airflow and cupped tank design found in previous releases by Joyetech, making sticky hands and smelly pockets a thing of the past with this atomizer. The 5mL tank is filled by removing the top cap to reveal very large fill port perfect for unwieldy droppers. The Cuboid Mini Atomizer accepts any and all of Joyetech's BF coil heads, as well as the new NotchCoilTM replacement heads. The Cuboid Mini Atomizer can also be completely disassembled for easy cleaning and maintenance.
Box Contents (Atomizer Head Not Included)
Replacement Heads Available Here:
WARNING: This tank uses sub-ohm resistance coils which your device may not support safely. Due to the increased risk when used incorrectly, extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on devices capable of firing sub ohm resistances and handling high amp loads. For mechanical mod users, please use batteries capable of 30A continuous or higher. If you're using a regulated mod, make sure both it and your batteries can handle the amperage. Improper use can lead to injury or damage. Take extra care to check with your ohm meter, ohms law calculator and amperage drain in order to stay safe! If you have any further inquiries, feel free to contact us by email.
Posted by Raymond Donaldson on 2nd Aug 2016
Got this tank yesterday, and at first was well pleased. Loaded it up with a Notch coil and it was great for about half a tank. I let it sit for a while and it started giving a lot of spit-back. Changed it out to a normal BF coil and it was much better. But again, once it fully saturated the coil after sitting a bit, it started the spit-back again, bad, but not as bad as the Notch. So, after some thinking, I found a good fix. I took the screen out of the Notch coil I had used first, and placed it in the bottom of the drip-tip channel to act as a spit guard. Worked great. Now when it does spit, 90+% of it gets caught by the second screen and drains back to the coil for the next puff. The 0.5 ohm BF coil works like a champ at 20 watts, and just for an oddity, I'm running it on an eLeaf 50. I also changed out the drip tip to a tall stainless ming tip. Been using happily all day. Turned out to be quite a decent tank once the extra screen was added.
This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).