*ON SALE FOR A LIMITED TIME!
The HCigar Taifun GT (clone) is a high quality Rebuildable Atomizer that features a large 5mL clear plastic tank and an adjustable center pin.
Rebuildable Atomizers are for the vaping enthusiast and will allow you to build your own coil and wicking system.
The Taifun GT's unique design allows easy filling / refilling and will allow you to easily rebuild your coils by lowering the chamber where the coils are built.
Build your wick with Silica Wick, Ekowool, Stainless Steel Mesh or Organic Cotton.
For best results, we recommend to wash the entire Atomizer (including the plastic tank) before use.
HCigar Taifun GT Rebuildable Atomizer Features
IMPORTANT NOTE: The Taifun GT Atomizer ( RBA ) are for EXPERTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.
OTHER IMPORTANT NOTES
The HCigar Taifun GT comes with
Posted by Paul on 11th Mar 2014
This device rocks. After finding the right build to my liking I love it. Micro coil 28 gauge A1 kanthal and cotton. Does not leak with right amount of cotton wick. Looks great on my Pro Vari.
Posted by Joe D on 10th Mar 2014
I bought 4 of these, two a few weeks ago and two last week. The fist two I would have given 5 stars no problems. The last two the draw was very very tight.and started to cause flooding. After watching a you tube, one I took the air pin out and flushed nothing but after taking the insulator out and flushed finally got good water flow. Put back together (without the coil) the draw was still tight. Took out the air pin and insulator and found on the end of the insulator a ragged piece of plastic, Cleaned off end put back together and now works. Again the next one found end of insulator ragged, fixed working great.
I use a micro coil both horizontal and vertical and both works great.
Posted by Kyle on 9th Mar 2014
It has some weird airflow issues. Seems as if the air flow is the same even with the tube out, just a taaad too tight for my liking, obviously that's personal choice. Also, it's hard to find a build that doesn't end up gurgling after it sits with no action for a few minutes. Again, it might be the builds I've tried so far. Otherwise this thing is gorgeous, very close to the original, and though it's limited to 23mm mods, it looks fanfaaastic on a provari with a beauty ring, and a brushed chi-you. Definitely worth the price!
Posted by Doug A on 26th Feb 2014
As my first encounter with a RBA, it was a little tricky getting the build just right to prevent leaking, but I started with a bit of a complex build recommended by Phil Busardo.
That being said, it is well worth the investment in time & the learning curve!
I have no experience with an authentic version, but I don't see how you could get much better than this.
Excellent quality and powerful delivery.
Posted by Lou B on 11th Feb 2014
I set up a micro coil on this in less than 10 mins with no problems or leaking issues. I watched a bunch of videos on youtube before trying to though... hehe. If you keep the coils raised up over the air hole and make sure you have no stray cotton around the air hole then it won't leak.. At least mine hasn't leaked in the 2 weeks I've been using it. I guess it has something to do with it stayin like a vacuum seal. The only reason I didn't give it 5 stars is because it has a slightly tighter draw than I would like. Not much of a problem though.