Loading... Please wait...

Evil Twin Stack 20650 Mech Kit by Deathwish Modz

$224.99
SKU: 190619
Availability:
Ships within 24 to 48 hours (see our shipping policy for details).
Qty

    Evil Twin Stack Mech MOD & Unholy RDA v2 Bundle by Deathwish Modz

    Outside of WiFi networks and good soap operas, evil twins just aren't very common. But now, you can have your very own Evil Twin in your life! While it won't be stealing your job or taking your girl, this Evil Twin Mech MOD comes paired with the familiar Unholy v2 RDA for an unholy union between this Evil Twin and vaping real good.

    The Evil Twin Mech MOD is a series mechanical mod that stacks two 18650 or 20650 in series for a staggering power boost. The Evil Twin's chassis is intelligently as well as artistically designed, utilizing only one set of chassis threads in the gorgeously engraved body in order to keep voltage drop to a minimum. The Evil Twin also uses the same tried-and-true firing switch as their previous mechanical mods, housing a silver-plated spring and silver-plated copper battery contact for pristine conductivity at all points in the circuit. The Unholy v2 RDA is similarly innovative, utilizing a uniquely constructed build deck that uses a ball-bearing in each post to clamp down on inserted leads, much like the anvil posts of the SZX RDA. The two crossbones "X"-shaped slots—positioned on either side of the sleeve—provides liberal amounts of air to demanding builds.

    *PLEASE NOTE THAT WE DO NOT OFFER INTERNATIONAL SHIPPING FOR THIS PRODUCT. ALL DOMESTIC ORDERS MUST BE SIGNED FOR AT THE VERIFIED BILLING ADDRESS!

    *This product does not qualify for free shipping and it has a fixed insured shipping cost of $6.99.

    Find Your Spares and Supplies Here:

    Features

    Evil Twin 20650 Stacked Mech MOD

    • Copper, Brass, or Stainless Steel Chassis
      • "Evil Twin" Engraved Design
      • Single Set of Chassis Threads
      • Limited Edition:
        • 500 Gunmetal
        • 200 Stainless Steel
        • 200 Brass
        • 100 Copper
    • Accepts Dual 20650 or 18650 Batteries
      • Stacked in Series
      • 18650 Delrin Adapter Included
    • Hybrid 510 Connection
    • Spring-Loaded Firing Switch
      • Signature Crossbones v2 Copper Switch
      • Silver-Plated Spring
      • Silver-Plated Copper Battery Contact
      • PEEK Insulation
    • Diameter: 26mm

    Unholy v2 RDA

    • Stainless Steel Construction
      • Matching Finish
    • Two-Post Build Deck
      • Ball-Bearing Clamping Mechanism
        • One 4mm Encased Ball-Bearing per Post
          • Insert Lead Above or Below Bearing
      • Allen Grub Screws
        • Top-Tension
      • PEEK Insulation
    • Fully Adjustable AFC
      • Dual "X"-Shaped Slots
    • Wide Bore ULTEM 810 Drip Tip
    • Copper Positive Pin
    • Diameter: 26mm

    Box Contents

    • 1x Evil Twin 20650 Stacked Mech MOD
      • 1x 20650 Battery Contact
    • 1x Delrin 18650 Adapter
    • 1x DWM Contact Removal Tool
    • 1x Unholy v2 RDA
    • 1x Spare Parts Pack
    • 1x User Manual

    **THIS DEVICE IS 8.4 VOLTS** This mechanical mod is wired in series, meaning that your maximum voltage (4.2V) will be multiplied by the number of battery cells in series, which does the same to your amperage load as well.  As such, series mechanical mods require extensive knowledge and familiarity with both Ohm’s Law and battery safety/amp limits in order to be used without risk of damage to yourself or your surroundings. If you are at all unfamiliar with this subject, feel free to contact us and we’ll be happy to either provide additional information or suggest comparable alternatives, such as an unregulated device wired in parallel.  Use this device with caution and at your OWN RISK.  By purchasing this device, you agree that we are NOT liable for any damages due to misuse.

    IMPORTANT NOTE: Rebuildable Atomizers (RBAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    Sign up for our newsletter

    View Cart Go To Checkout