These Stainless Steel eGo Sleeve Cone compliments any eGo, iTaste MVP and other eGo threaded battery/devices when used with 510 threaded Clearomizers / tanks and Atomizers.
The eGo Sleeve Cone covers the gap and outside threads to help provide a seemless look and appearance.
You may also use the eGo Sleeve Cone for Cartomizers that are too wide in diameter for normal eGo/RiVa type Cones.
Posted by 100%VG on 4th Dec 2014
I use Type "C" on my ZMax with my AGA-T2 tanks. I screw the sleeve cone onto the eGo threading and then adjust the space between the cone and the bottom of the AGA-T2, so that the AGA-T2 can screw down securely onto something, and not wobble. I also adjust the cone height up/down so that the air hole is aligned with the button when the tank is screwed down tight. This keeps from jamming the tank's 510 threads into the ZMax too far, and satisfies my OCD with the air hole alignment. LOL
The rim of the cone also somewhat blocks the gap between the tank and the ZMax that shows. Using it this way, it gives the AGA-T2 something to screw down onto without over tightening into the ZMax 510, and I can align my air hole. Three solutions in one!
This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).