Loading... Please wait...

Efusion DNA200 Box MOD by Lost Vape

 star rating 5 Write a Review
$199.99 (You save $40.00)
SKU: 950299
Ships within 24 to 48 hours (see our shipping policy for details)

    Efusion DNA 200 Box MOD by Lost Vape

    Bringing their most popular device up to date, Lost Vape has upgraded their E-Square Box Mod to incorporate the recently released DNA200 operating chip by Evolv, giving birth to the Efusion Box Mod, a device bristling with a plethora of features brought by the innovative DNA200 such as a maximum power range of 200W, complete temperature control, and in-depth customizability via EScribe. Of course, Lost Vape kept the great features included in their previous devices intact such as ultra-smooth milled stainless steel buttons, a spring-loaded nickel-plated brass 510 positive pin, anodized aluminum chassis, replaceable panels and an easy-access micro-USB port, while upgrading the internal components with an integrated FullyMax 1300mAh 14.4 Watt Hour 11.1V 3S LiPo, complete with balanced cell charging along with a XT30 connector for replacing worn batteries, providing both incredible performance and the equivalent battery life of a 3900mAh 3.7V cell. With such a fantastic fusion of features and functionality along with a gorgeous and flawless chassis, this is one box mod that will be hard to beat. Find out how great vaping can be by getting one for yourself today.


    Efusion DNA 200 Features

    • Replaceable Carbon Fiber Doors
    • 6061 T6 Anodized Aluminum Chassis
    • Custom Milled Stainless Steel Buttons
    • Stainless Steel 510 Threading
    • 510 Positive Pin
      • Nickel Plated Brass
      • Spring-Loaded
    • Lithium-Polymer Battery
      • 1300mAh FullyMax 3 Cell
      • 14.4Wh
      • 11.1V
      • Equivalent to a 3900mAh 3.7V Cell
    • XT30 Connector allows for the removal of the LiPo battery pack
      • Please Note: Removing existing battery will void the warranty. This feature is intended for advanced users ONLY and requires additional set-up through EScribe.
    • 1W to 200W Output Range
      • ≤100W in Power Mode (Customizable to ≤200W through Escribe)
      • ≤200W in Temperature Control Mode
    • Output Voltage Range: 1V-9V
    • Output Current Range
      • 50A Continuous
      • 55A Instantaneous
    • Kanthal Resistance Range: 0.1Ω - 2.0Ω
    • TC Resistance Range: 0.08Ω - 1.0Ω
    • TC Range: 200°F - 600°F (93°C - 316°C)
    • Lockable Resistance (TC Mode)
    • Individual Cell Monitoring
    • Group Cell Balancer
    • Built-in 1A USB Charger
    • Safety Protection Suite
      • Atomizer Detection
      • Weak Battery Warning
      • Temperature Limiter
      • Short Circuit Protection
      • Low/High Resistance Warning
      • Auto Power Down
      • Circuit Board Heat Protection
    • Modes:
      • Lock Mode
      • Stealth Mode
      • Power Lock Mode
      • Power Preset Mode
    • Dimensions: 85mm by 60mm by 25mm

    Box Contents

    • 1x Efusion DNA 200 Box MOD by Lost Vape
    • 1x Retracting Micro-USB Charging Cable
    • 1x User Manual


    Current Owner's of the EFusion Should Follow the Following Steps to Ensure Maximum Performance/Battery Life!

    Download and Install EScribe via the link provided above (PC Only Currently).
    2.) Start EScribe and connect the EFusion to your PC
    3.) When prompted, update your Efusion to the latest firmware version.
    4.) Navigate to the 'Mod' tab in Escribe. Verify that under 'Type', 'Lithium Polymer' is selected.
    5.) Press 'Watt-Hour Calculator'. Confirm that you know the battery type installed.
    6.) Change Value '720' to '1300' and Confirm.

    7.) Confirm that 14.43 Watt Hours (Wh) is calculated, then click 'Yes'
    8.) Upload the new settings to your Efusion.
    Your Lost Vape EFusion DNA 200 is now up to date!

    To restore charging on the Efusion:

    1.) Open EScribe.
    2.) Connect your Efusion.
    3.) Open the "Device Monitor" tab.
    4.) Click on "Diagnostics".
    5.) Click on "Advanced", then "Perform USB Recovery Charging".
    6.) The actual charge will be shown in real-time. Do not disconnect until the device reaches 11.2v.
    7.) Complete full charge with a ≥1A wall adapter and USB cable.

    WARNING: Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

    Write your own product review

    1. Great device, OK battery life.  star rating

      Posted by Ken on 4th Dec 2015

      First: I could not get the update to work as described in the instructions found here or anywhere else. I downloaded the file and opened it directly and updated that way.

      The device is beautifully colored (mine is gold) . It fits easily my hand. The only physical feature I find lacking is how soft the firing button is.

      The battery life leaves a little to be desired. Even using lower temperature and power settings, I still get what is in my opinion sub-par battery life.

      4 out of 5 starts for the product, 5 stars for EVC.coms customer service team! These guys have done their best to take care of me everytime I order through them.

    2. 16 hours on 60 watts!  star rating

      Posted by justin on 30th Nov 2015

      bought this mod on black Friday. was shipped same day and i received it the next day! very helpful customer service and great communication. thanks guys. the dna 200 chip is awesome so many possibilities for personalization with the software. built a dual Clapton kanthal coil at .5 ohms and have been getting about 14-16 hours battery life. plus the guys updated it and changed the necessary battery specifications before they shipped it out! will order again

    This product does not carry any warranty and we only guarantee that you will not receive it DOA (Dead on Arrival).

    Sign up for our newsletter

    View Cart Go To Checkout