Loading... Please wait...

3D RDTA Clone by HCigar

 star rating 5 Write a Review
$6.00
$39.99 (You save $33.99)
Availability:
Ships same day if order placed before 2:00 P.M. EST (except Sundays and Holidays)
Qty

    The HCigar 3D (clone) is a high quality 22mm stainless steel Rebuildable Dripping Atomizer ( RDA ) that features a laser-etched logo design,  auto-dripper tank system, adjustable airflow controller ring, triple post design and it has hybrid threading for the Nemesis MOD.

    Rebuildable Atomizers are for the vaping enthusiast and will allow you to build your own coil and wicking system.

    The HCigar 3D's unique design features a 2mL tank and pump system underneath it's deck.

    With a quick press of the top cap, the pump system will allow you to drip directly to your wick from it's built-in tank.

    This feature will help to eliminate the need to constantly drip and it an ideal dripper for certain situations such as while driving.

    The HCigar 3D RBA's deck has a triple post, phillips head screw design for easy single or dual coil builds.

    You can customize your vapor production with a simple spin of the adjustable ring to allow you to open up to two airholes.

    It also features a stainless steel body with a '3D' laser-etched engraving, double o-ring top cap that can fit 'most' 510 size Drip Tips.

    For best results, we recommend to wash the entire Atomizer before use.

    IMPORTANT NOTE: HCigar 3D Rebuildable Dripping Atomizers ( RDAs or RBAs ) are for EXPERTS and ARE NOT recommended for average users or beginners.  The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks.  WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    HCigar 3D RDA Features

    • High quality 1:1 clone
    • Brushed stainless steel body
    • "3D" laser-etched logo
    • Rebuildable auto-dripping atomizer
    • Pump-system top cap
    • 2ml bottom tank
    • Triple post design, phillips head screw
    • Adjustable airflow controller
    • 510 threading and hybrid connection for the Nemesis MOD
    • Matching 510 drip tip included and can be used with 'most' 510 size Drip Tips
    • 22mm Diameter

    OTHER IMPORTANT NOTES

    1. Wicks / Coils must be tested carefully with a multimeter before use.
    2. If Wick / Coil is not properly tested it will be a risk to the user to do so.
    3. Faulty Wicks / Coils WILL kill electronic devices.
    4. New Wick / Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
    5. No new Wick / Coil assembly should be used on an electronic device until it is known to be safe.
    6. These items destroy electronic devices if not properly built.  This is a known issue.

    The 3D RDA comes with

    • 1x HCigar 3D (clone) Rebuildable Dripping Atomizer
    • 1x Matching Stainless Steel 510 Drip Tip
    • 2x Sample wire & wick
    • 3x Spare phillips-head screws
    • 2x Spare washers
    • 5x Spare O-Rings

    Write your own product review

    1. Works!  star rating

      Posted by Eric M. on 27th May 2014

      I used this on a 4 hour roadtrip. I did have to redrip of course at some point, but I was able to make it different stops to refill it. I had another version of the 3D(clone also) that had o-rings that were too tight. These are perfect and allow for full functionality. Thankfully!

    WE DO NOT OFFER ANY WARRANY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.

    Sign up for our newsletter

    View Cart Go To Checkout